Kayayyaki

  • Wutar Lantarki Roll Kafa Injin

    Wutar Lantarki Roll Kafa Injin

    Kayan ado
    Faɗin coils: ≤462mm;
    Material kauri 0.6mm;
    Material yi diamita na ciki: ≥φ450mm;
    Max.OD Coil: φ1200mm;Nauyi: ≤3T;Tsayin tsakiya: 650mm
    Girman ƙasa (tsawo x nisa) 1200x1000mm
    Na'ura mai ɗaukar nauyi da Leveling
    Yawan jujjuyawar aiki: 11 rolls leveling
    Ya ƙunshi abin nadi na tsunkule da abin nadi mai daidaitawa.Ana iya daidaita abin nadi na tsuntsu daban-daban.Ƙarshen ciyarwar
    Na'ura mai daidaitawa tana sanye da nau'i-nau'i na rollers masu jagora da nau'i-nau'i biyu na rollers a tsaye.Mai jagora a tsaye
    rollers na iya motsawa a tsakiya kuma suna motsawa lokaci guda.
    Diamita na abin nadi: 60MM
    Nisa tsakanin matakin rollers: 65MM
    NCF-500 Servo Feeder
    Aiki: Auna tsawon aikin aikin da buƙatun aikin don jan hankali, ciyarwa da hatimi.
    Siffofin tsari: nau'i-nau'i biyu na na'urorin motsa jiki, na'urar daidaitawa ta raguwa, firam, servo motor, da dai sauransu;
    Sarrafa motar Servo: Kafaffen ciyarwa;
    LCD tabawa: mai sauƙin canzawa da saita sigogin fasaha daban-daban.
    Siga:
    (1) Matsakaicin wucewa nisa na takardar shine 462mm
    (2) Hanyar ciyarwa: Ciyarwar Servo
    (3)Lokacin ciyarwa gwargwadon lokacin naushi
    Tsarin naushi
    1. Kunshi na'ura mai nau'in nau'in hydraulic 4
    2. Bangaren: Base, na'urar matsa lamba na ruwa, tsarin hydraulic, da dai sauransu;
    3. Siga: (1) Matsa lamba 16Mpa-25 Mpa
    (2) Wutar lantarki 7.5KW
    4. Aiki: Kammala tambarin da ƙugiya / yanke kusurwa na allon 2F.
    Cika alamar tambari da ƙugiya/yanke blanking na allon 1F don samar da takardar don filogin hannu guda ɗaya da ke kafawa.
    Roll forming inji
    Machine 1 don Fundo F2: Torii ta hanyar shaft
    tsari + tsarin masaukin cantilevered;Cikakken ci gaba da gyare-gyaren ciyarwa.
    Na'ura 2 don Fundo F1: Torii ta hanyar tsarin shaft + tsarin masaukin cantilevered;Cikakken ciyarwar filogi na hannu-sheet ɗaya
    kafa.
    Tsarin: Injin daidaita nau'in canji mai sauri.Gado yana ɗaukar tsarin waldadden tsari da maganin damuwa;gear yana ɗaukar 45
    karfe wuya hakori surface;
    Babban ƙarfi, babban taurin, babban madaidaici, babban rayuwar sabis.
    Siga:
    (1) Raw abu kauri 0.6mm (lokacin σs≤260Mpa)
    (2) Raw abu nisa ≤462mm (daidaitacce)
    (3) Ƙirƙirar wucewa: Ƙirƙirar na'ura ①: 17 wucewa;Na'ura mai ƙira ②: 12 wucewa
    (4) Ƙarfin Mota 5.5kw, Motar sauya mitar
    (5) Yanayin watsawa Gear watsa
    (6) Saurin niƙa 0-12m/min
    (7) Mirgine kayan Cr12 quenched HRC56°-60°
    Na'urar yankan waƙa ta atomatik na Hydraulic
    Aiki: Yanke ta atomatik kuma lanƙwasa bayanin martaba mai sanyi akan layi bisa ga girman buƙatun.
    Tsarin:
    Yankan kai: Silinda, farantin saman, shafi, farantin gindi.
    Jikin na'ura: Faranti, ƙafafun, axles, jikin firam, buffers, katako mai tushe, da sauransu.
    Siga:
    (1) Matsakaicin yanki yanki (tsawon × nisa) 433 × 16mm
    (2) Girman ƙasa (tsawon × nisa): 1000mm × 800mm
    (3) Wutar lantarki: 4kw
    Tebur mai karɓa
    Tsarin: nau'in abin nadi, babu iko;kunshi gado, goyon baya, abin nadi shaft,
    Tsarin sarrafa wutar lantarki
    Duk layin yana ɗaukar ikon PLC, LCD touch
    allo, man-inji ke dubawa.
    Aiki:
    (1) Saitin dijital na tsawon sashi.
    (2) Ana iya daidaita tsayin sassan.
    (3) Saka idanu na ainihi na yanayin aiki na kayan aiki da alamar kuskure.
    Akwai hanyoyi guda biyu na aiki: manual/atomatik
    A cikin jihar manual, ana iya sarrafa shi azaman na'ura mai zaman kansa, wanda ya dace don kiyayewa;a cikin yanayin atomatik, da
    Ana aiwatar da duk layin samarwa, kuma jerin suna farawa
    Maɓallin dakatarwa na gaggawa a kan dukan layi, waɗanda suke da sauƙi don magance haɗari na gaggawa da kuma tabbatar da amincin kayan aiki da
    masu aiki
  • Karfe coils Slitting prodction line

    Karfe coils Slitting prodction line

    Abubuwan Ciyarwar Bayani na asali: 0.12-1.0mm Gudun: Gudun Layi 55-60m/min Gudun Yanke: (na 2000mm) 25-30pieces / min Matsayin Rollers Material: 40Cr Tare da Chromed 0.1mm Uncolier: Capacity 15T Hydraulic Independent With Trolley Nuded Productivity:20 sets Brand:YY Transport:Teku Place of Asalin:Hebei Samfura Ability:20 sets Certificate:CE/ISO9001 HS Code:84552210 Port:Tianjin Xingang Description Samfuran Layin Slitting atomatik don Ƙarfe na Ƙarfe Neman Ƙaƙƙarfan Coils...
  • Babban kanti na ajiya shiryayye Roll kafa inji

    Babban kanti na ajiya shiryayye Roll kafa inji

    Bayanin Wannan na'ura don yin babban kanti ne na baya-bayan nan.Decoiler → Daidaita → servo ciyarwa → punching → forming → yankan → gama Duk layin samarwa yana da ingantaccen samarwa da ingantaccen saurin 0-12m / min Babban ƙarfi da kwanciyar hankali Kayan abin nadi shine Cr12 yana da inganci mafi girma da tsawon sabis.Servo feeder + naushi, babban ingancin naushi mutu, ƙarin daidaitaccen nau'in nau'in nau'in nau'in injin 7.5kw kauri 0.6mm fo ...
  • Tube Mill line Tube waldi line

    Tube Mill line Tube waldi line

    Samfurin Bayani na asali No.:YY–TML-001 Yanayi:Sabu Na Musamman:Ka'idar Musamman:Sauran Aikace-aikace:Nau'in Masana'antu:High Frequency Weld Pipe Mill Line Round Bututu Girman Girman Girman:Φ8-Φ630 mm Round Bututu Kauri Range:0.5-20.0 Girman Bututu Mm Square Girman Range: 10*10-500*500 mm Squre Bututu Kauri kewayon:0.5-20.0 mm Tsawon Saurin Samarwa:60-70M/min Ƙirƙirar Kullum: 6000 Tubus Ƙarin Bayani Marufi: Tsirara Samfura:100 SETS/YEAR Alamar:YINGYEE Sufuri: Wurin Asalin Teku: CHINA Sup...
  • Atomatik Laser waldi inji

    Atomatik Laser waldi inji

    Basic Parameter
    Ƙarfin Laser 1000W 1500W 2000W 3000W
    Kaurin walda (zurfin narkewa) Lura: Ɗauki bakin karfe a matsayin misali 2mm
    (0.2mm-2.0mm)

    1.5mm (1.5m/min) 4mm
    (0.2mm-3.5mm)

    3mm (1.5m/min) 6mm
    (0.2mm-4.5mm)

    4mm (1.5m/min) 10mm
    (0.2-6.5mm)

    6mm (1.5m/min)
    Saurin walda 0-4m/min (sau 3 zuwa 10 da sauri fiye da waldi na gargajiya)
    Welding Waya Bukatun Ƙara ko a'a ƙara bisa ga tsari bukatun, 0.8-2.0 talakawa waldi waya
    Hanyar walda ta ciki,
    kusurwar waje,
    flat waldi,
    welding overlapping,
    walda mai gefe guda, gyare-gyare mai gefe biyu
  • Ƙananan farashin PPGI karfe coils

    Ƙananan farashin PPGI karfe coils

    600-1500 Prepainted galvanized karfe coils ne pre-fentin galvanized karfe, kuma aka sani da pre-rufi karfe, launi mai rufi karfe da dai sauransu.
  • Masana'antu Trinity Guardrail Roll Forming Machine

    Masana'antu Trinity Guardrail Roll Forming Machine

    Garanti na asali: Lokacin Bayarwa na Watanni 12: Kwanaki 30 Bayan Sabis: Injiniya Akwai Don Sabis na Injiniyan Waje Nau'in: Tsarin Karfe & Kayan Injin Purlin: GI, PPGI, Yanayin Yanke Aluminum: Gudun Samar da Ruwa: 25-30m/min (ban da naushi) Voltage: 380V/3Phase/50Hz Ko A Hanyar Neman Tuƙi: Sarkar Ko Akwatin Gear Abun Yankan Ruwa: Cr12 Ƙarin Bayani Marufi: NUDE Yawan aiki: 200 saiti / shekara Alamar: YY sufuri: Wurin Asalin Teku: Ikon iyawa na Hebei :200...
  • PPGI Prepainted Galvanized Coils

    PPGI Prepainted Galvanized Coils

    Samfurin Bayani na asali No.:YY-PPGI-001 Kauri: 0.13-2mm Nisa: 600-1500mm Matsayin Fasaha: ASTM DIN GB JIS3312 Tushen Zinc: 40-275 G/m2 Launi: Duk Launukan RAL, Ko Dangane da Abokan ciniki Bukatar / Samfura Babban Gefe: Fitilar Fititi+ Polyester Paint Rufin Baya Gefe: Nauyin Maɗaukaki na Epoxy Coil: 3-8 Tons Kowane Coil Ƙarin Bayanin Marufi: Kunshin Fitarwa: Ton 100000 / shekara Alamar: YY Sufuri: Wurin Asalin Teku: Iyawar China: 100000 ton/shekara Takaddun shaida:ISO9001 HS Code:7...
  • Mai saurin canzawa C/Z purlin roll kafa inji

    Mai saurin canzawa C/Z purlin roll kafa inji

    Samfuran Bayani na asali No.:YY-CZP-002 Nau'in: Rufin Rufin Rubutun Ƙirƙirar Injin Garanti: Lokaci na Isar da Watanni 12: Kwanaki 30 Abu: Karfe Coil, Galvanized, PPGI, Aluminum Speed: 6-8m/min (gami da naushi da lokacin yankewa). ) Tsarin Sarrafa: Panasonic/Mitsubishi PLC Hanyar Tuƙi: Sarkar watsa Yanayin Yanke: Kayan Aikin Ruwa na Yankan Ruwa: Cr12 Wutar Lantarki: A Buƙatar Abokin Ciniki Ƙarin Bayanin Marufi: FILM FILM, WOODEN CASE Samfura: 200 sets/shekara Brand: YY Transport:Oce ...
  • Zinc Karfe Angle Roll kafa inji

    Zinc Karfe Angle Roll kafa inji

    Samfurin Bayani na asali No.:YY–SAM-004 Yanayi:Sabon Na'am:Sabon Nau'in:Madaidaicin Matsayi Atomatik:Tsarin atomatik:Sauran Hanyar Watsawa:Tsarin Sarrafa Injiniya:PLC Abubuwan Nadi:Cr12mov Babban Wuta:15kw Gudun:25m/min Watsawa: Akwatin Gear Ƙarfin Ruwa: 11KW Nau'in Yanke Nau'in: Servo Nau'in Yankan Ruwa: 1.0-2.5 mm Ƙarin Bayani Marufi: Naked Productivity: 200 sets/year Brand: YINGYEE Sufuri: Tekun Wurin Asalin: Ƙarfin Samar da Sin: 200 saiti / Takaddun shaida: ISO.9001 .
  • Iron Angle Roll kafa inji

    Iron Angle Roll kafa inji

    Samfurin Bayani na asali No.:YY—SAM—004 Yanayi: Sabon Na'urar: Sabbin Na'ura: Kirkirar Matsayi Atomatik: Tsarin atomatik: Wani Hanyar Watsawa: Tsarin Kula da Injiniya: PLC Material Na Nadi:Cr12mov Babban Wuta:15kw Gudun:25m/min Watsawa: Akwatin Gear Ƙarfin Ruwa: 11KW Nau'in Yanke Nau'in: Servo Nau'in Yankan Ruwa: 1.0-2.5 mm Ƙarin Bayani Marufi: Naked Productivity: 200 sets/year Brand: YINGYEE Sufuri: Tekun Wurin Asalin: Ƙarfin Samar da Sin: 200 saiti / Takaddun shaida: ISO.9001 .
  • atomatik square bututu sabon na'ura

    atomatik square bututu sabon na'ura

    Samfurin Bayani na asali No.:YY–APC—003 Tsarin Sarrafa: PLC Kayan Bututu: KARFE Nau'in Feeder Nau'in: Nau'in Mota Nau'in Mai Nau'in Mai Nau'in: 10-50KG Nau'in Yanke: Tsarin Yankan Tsari: Galvanized Iron Bututu Standard: GB Ƙarin Marufi :NAKED Productivity:500 SETS/YEAR Alamar:YINGYEE Sufuri:Tsarin Teku:Tsarin Samar da China:500 SETS/Shekadar SHEKARA:ISO9001 Port:SHANGHAI Bayanin Samfuran Karfe Zagaye Bututu Yankan Machine Kamfaninmu ana lasafta shi a matsayin mu...
123456Na gaba >>> Shafi na 1/45

Aiko mana da sakon ku:

Ku rubuta sakonku anan ku aiko mana